Hydroscopic and Heat Releasing Finishing Agent

Hydroscopic and

Heat Releasing Finishing Agent

HOLPOSON® HOT

HOT is suitable for finishing cotton, viscose, polyester, acrylic and other fibers. Its working principle is as follows: The product treated on the fabric make the water vapor or sweat vapor around the fabric condense into water drops. And the condensation heat produced makes the human body feel warm, so as to achieve the function of heat storage and warmth preservation.

Physical & chemical properties:             

Composition:  Special polyacrylic acid, etc.

Appearance:   Yellowish transparent weak viscous liquid

Ionicity:       Weak cationic

Solubility:     Soluble in water

pH:           5-6

Usage:

Dosage: Depends on different types of materials to be treated. Generally 6.0-10.0% (o.w.f.)

1. Padding method

Dosage: HOT 80-130g/L

Treatment method: Dip and roll twice, with liquid rate of about 80%, drying and heat setting above 120 ℃

2. Impregnation method (applicable to cotton and viscose)

Dosage: 6-10% (o.w.f.)

Dissolv evenly to prepare the solution → impregnation (20 minutes) → dehydration (about 50% of liquid content) → drying (80 ℃) → heat setting (120 ℃, 1-2 minutes)

3. Melt spinning method

Prepare the solution according to the actual situation and technical suggestions.

Attentions:

Before using the product, please confirm whether the fabric is treated with hydrophobic softener. It is recommended to add hydrophilic softener. The prepared working solution should be used within the same day.

Storage:

1. Store indoor

2. Avoid overheat and severe cold